Papers
Authors
|
Title
|
Publication
|
| 2012 | ||
| C. Li,, S. Mann, and S. Bedi | NURBS approximation to the flank-milled surface swept by a cylindrical NC tool | International Journal of Advanced Manufacturing Technology. Vol. 61, 2012, pg 35-51. |
| 2011 | ||
| K. Patel, G. S. Bolanos, R. Bassi, and S. Bedi | Optimal tool shape selection based on surface geometry for three-axis CNC machining | International Journal of Advanced Manufacturing Technology. Vol. 57, 2011, pg 655-670. |
| G. Israeli, S. Mann, S. Bedi, and A. Jawanda | Numerical Verification of CNC Machine Simulations | Computer-Aided Design and Applications. Vol. 8, 2011, pg 507-518. |
| 2010 | ||
| R. Bassi, N. Venkata Reddy, and S. Bedi | Automatic recognition of intersecting features for side core design in two-piece permanent molds | International Journal of Advanced Manufacturing Technology. Vol. 50, 2010, pg 421-429. |
| S. Mann, S. Bedi, G. Israeli, and X. Zhou | Machine Models and Tool Motions for Simulating 5-Axis Machining | Computer-Aided Design. Vol. 42, 2010, pg 231-237. |
| 2009 | ||
| G. Bolanos, S. Mann, and S. Bedi | Targeted WebCAD | Computer-Aided Design and Applications. Vol. 6, 2009, pg 639-644. |
| 2008 | ||
| C-G Li, S. Bedi, S. Mann | Accuracy improvement method for flank milling surface design | International Journal of Advanced Manufacturing Technology. Vol. 38, 2008, pg 218-228. |
| C. Li, S. Bedi, S. Mann | Flank Millable Surface Design with Conical and Barrel Tools | Computer-Aided Design and Applications. Vol. 5, 2008, pg 461-470 |
| 2007 | ||
| P. Gray, F. Ismail, S. Bedi | Arc-intersect method for 3 1/2 1/2-axis tool paths on a 5-axis machine | International Journal of Machine Tools and Manufacture . Vol. 47, 2007, pg 182-190 |
| N. Manos, S. Bedi, D. Miller, and S. Mann | Single Controlled Axis Lathe Mill | International Journal of Advanced Manufacturing Technology. Vol. 32, 2007, pg 55-65 |
| C-G Li, S. Mann, S. Bedi | Flank Millable Surfaces Generated via Polynomial Composition | Computer-Aided Design and Applications. Vol. 4, 2007, pg 41-48 |
| D. Roth, F. Ismail, S. Bedi | Mechanistic modelling of 5-axis milling using an adaptive and local depth buffer | Computer-Aided Design. Vol. 39, 2007, pg 302-312 |
| 2006 | ||
| A. Roman, S. Bedi, F. Ismail | Tool path planning for 3 1/2 1/2-axis machining | International Journal of Manufacturing Research. Vol. 1, 2006, pg 248-265 |
| C-G Li, S. Bedi, S. Mann | Flank milling of ruled surfaces with conical tools -- an optimization approach, | International Journal of Advanced Manufacturing Technology. Vol. 29, 2006, pg 1115-1124 |
| 2005 | ||
| C. Li, S. Bedi, S. Mann | Error Measurements for Flank Milling | Computer-Aided Design. Vol 37, 2005, pg. 1459-1468 |
| P. Gray, S. Bedi, F. Ismail | Arc-intersect method for 5-axis tool positioning | Computer-Aided Design. Vol 37, 2005, pg. 663-674 |
| 2004 | ||
| C. Kaplan, S. Bedi, S. Mann, G. Israeli, G. Poon | A New Paradigm for Woodwoorking with NC Machines | Computer-Aided Design and Applications. Vol 1, 2004, pg. 217-222 |
| C. Menzel, S. Bedi, S. Mann | Triple Tangent Flank Milling of Ruled surfaces | Computer-Aided Design. Vol. 36, 2004, pg 289-296 |
| P. Gray, F. Ismail, S. Bedi | Graphics-assisted Rolling Ball Method for 5-axis surface machining | Computer-Aided Design. Vol. 36, No. 7, 2004, pg. 653-663 |
| P. Gray, S. Bedi, and F. Ismail | Rolling Ball Method for 5-axis Surface Machining | Computer-Aided Design. Vol. 35, 2004, pg. 347-357 |
| D. Roth, F. Ismail, S. Bedi | Mechanistic modelling of the milling process using complex tool geometry | To appear in International Journal of Advanced Manufacturing Technology |
| 2003 | ||
| D. Roth, F. Ismail, S. Bedi | Mechanistic Modelling of the Milling Process using an Adaptive Depth Buffer | Computer-Aided Design. Vol. 35, 2003, pg 1287-1303 |
S. Bedi, S. Mann, and C. Menzel |
Computer-Aided Design. Vol. 35, 2003, pg 293-300 |
|
P. Gray, F. Ismail, S. Bedi |
Symposium on Solid Modeling and Applications. 2003, pg. 340-345 |
|
| 2002 | ||
| S. Mann and S. Bedi | Generalization of the imprint method to general surfaces of revolution for NC machining | Computer-Aided Design. Vol. 34, No 5, 2002, pg 373-378 |
| 2001 | ||
| A. Warkentin, P. Hoskins, F. Ismail, S. Bedi | .Computer-Aided 5-Axis Machining | In Computer-Aided Design, Engineering, and Manufacturing: Systems Techniques, and Manufacturing, Vol I. 2001, Chapter 3 |
| S. Mann, D. Roth, S. Bedi | The swept surface of an elliptic cylinder | Symposium on Solid Modeling and Applications. 2001, pg. 302 |
D. Roth, S. Bedi, F. Ismail, and S. Mann |
Computer-Aided Design, Vol. 33, No. 1, 2001, pg. 57-63 |
|
P. Gray, S. Bedi, F. Ismail, N. Rao, and G. Morphy |
The Int. J. of Advanced Manufacturing Technology, Vol. 17, 2001, pg. 562-569 |
|
| 2000 | ||
| Warkentin, A., F. Ismail, S. Bedi | Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces | Computer-Aided Design, Vol. 17, No. 1, 2000, pg. 83-100 |
Warkentin, A., F. Ismail, S. Bedi |
Int. J. of Machine Tools and Manufacture, Vol. 40, 2000, pg. 185-208 |
|
| 1999 | ||
| D. Roth, S. Bedi, F. Ismail | Generation of Swept Volumes of Toroidal Endmills in Five-Axis Motion Using Space Curves | Symposium on Solid Modeling and Applications. 1999, pg. 306-311 |
| 1998 | ||
Sheltami, K., S. Bedi and F. Ismail |
Int. Journal of Machine Tools and Manufacture , Vol. 38, 1998, pg. 855-870 |
|
Warkentin, A., F. Ismail, S. Bedi |
Computer Aided Geometric Design, Vol. 4, 1998, pg. 63-70 |
|
| 1997 | ||
D. Dragomatz, S. Mann |
Computer-Aided Design, Vol. 29, 1997, pg. 239-247 |
|
Rao, N., F. Ismail, S. Bedi |
Int. J. of Machine Tools and Manufacturing, Vol. 37, 1997, pg. 1025-1040 |
|
S. Bedi, F. Ismail, M.J. Mahjoob and Y. Chen |
Toroidal Versus Ball Nose and Flat Bottom End Mills |
Int. J. of Advanced Manufacturing Technology, Vol. 13, 1997, pg. 326-332 |
S. Bedi, S. Gravelle and Y. Chen |
Principal Curvature Alignment Technique for Machining Complex Surfaces |
ASME J. of Manufacturing Science and Engineering, Vol. 1997, pg.756-765 |
H. ElMounayri, M. Elbestawi , A.D. Spence and S. Bedi |
General Geometric Modelling Approach for Machining Process Simulation |
Int. J. of Advanced Manufacturing Technology, Vol.13, 1997, pg. 237-247 |
| 1996 | ||
Rao, N.V., S. Bedi and R. Buchal |
Implementation of Principal Axis Method for Machining of Complex Surfaces |
Int. J. of Advanced Manufacturing Technology, Vol. 11, 1996, pg. 249-257 |
Warkentin, A., S. Bedi and F. Ismail |
Int. J. of Machine Tools and Manufacture, Vol. 36, 1996, pg. 229-243 |
|
| 1992 | ||
S. Bedi |
Computer Aided Design, Vol. 24, No. 9, 1992, pg. 505-512 |
|
S. Bedi, I. Ali and N. Quan |
Advanced Interpolation Techniques for NC Machines |
Trans. of ASME J. of Engineering for Industry, Vol. 115, No. 3, 1992, pg. 329-336 |
Ali, I. and S. Bedi |
NC Controller for Surface Machining |
Int. J. of Advanced Manfacturing Techology, Vol. 7, 1992, pg. 150-158 |
S. Bedi and N. Quan |
Spline Interpolation Technique for NC Machines |
Computers in Industry, Vol. 18, 1992, pg. 307-313 |
| 1989 | ||
S. Bedi and G.W. Vickers |
Computer-Aided Geometric Design, Vol. 6, No. 2, 1989, pg. 87-96 |
|
| 1987 | ||
S. Bedi and G.W. Vickers |
Post-Processors for Numerically Controlled Machine Tools |
Computers in Industry, Vol. 9, No. 1, 1987, pp. 3-18 |
| 1985 | ||
Vickers, G.W., S. Bedi and R. Haw |
The Definition and Manufacture of Compound Curved Surfaces Using G-Surf |
Computers in Industry, Vol. 6, No. 3, 1985, pp. 173-183 |
Last updated on:
February 22, 2013